You searched for all products in App: 13B-T & 6PI NA (86-91 2nd gen FC)
List Price: $49.95
Your Price: $30.53
You Save: $19.42 (39 %)
Tension Bolt Washer Removal Tool
|
List Price: $125.17
Your Price: $92.58
You Save: $32.59 (26 %)
|
List Price: $17.17
Your Price: $9.64
You Save: $7.53 (44 %)
These Mazda apex seal springs fit 2mm 13B & 20B apex seals from 1986 through 1993 (S4, S5, FD, RE, 20B). One long and one short spring are required per apex seal; 6 of each for a 2-rotor 13B and 9 of each for a 20B.
|
List Price: $15.98
Your Price: $8.61
You Save: $7.37 (46 %)
These Mazda apex seal springs fit 2mm 13B & 20B apex seals from 1986 through 1993 (S4, S5, FD, RE, 20B). One long and one short spring are required per apex seal; 6 of each for a 2-rotor 13B and 9 of each for a 20B.
|
List Price: $912.21
Your Price: $865.82
You Save: $46.39 (5 %)
Brand new OEM front rotor housing for 1989-1991 13B-Turbo (FC, 2nd gen, S5). Machined for running alternative spark plugs at no added cost. Recommend replacment in pairs. Rear housing is a different number, so order separately. Will NOT fit Flat Rate Box.
|
|
|
|
Complete internal heavy duty seal and spring rebild kit for Mazda 13B Turbo and Non-turbo FC (2nd gen) RX-7 engine. Includes our special heavy duty water seal kit.
|
List Price: $912.21
Your Price: $865.82
You Save: $46.39 (5 %)
Brand new OEM rear rotor housing for 1989-1991 13B-Turbo (FC, 2nd gen, S5). Machined for alternative spark plugs at no added cost. Recommend replacment in pairs. Rear housing is different part number, so order separately. Will not fit Flat Rate Box!
|
List Price: $912.21
Your Price: $802.81
You Save: $109.40 (12 %)
Brand new OEM front rotor housing for 1987-1989 13B-Turbo (FC, 2nd gen, S4). Machined for running alternative spark plugs at no added cost. Recommend replacment in pairs. Rear housing is differentt number, so order separately. Will NOT fit Flat Rate Box!
|
List Price: $912.21
Your Price: $802.81
You Save: $109.40 (12 %)
Brand new OEM rear rotor housing for 1987-1989 13B-Turbo (FC, 2nd gen, S4). Machined for running alternative spark plugs at no added cost. Recommend replacment in pairs. Rear housing is different number, so order separately. Will NOT fit Flat Rate Box!
|
List Price: $55.69
Your Price: $32.44
You Save: $23.25 (42 %)
Main Bearing for all rotary engines prior to 1993 and the '04-'08 RX8, low hp engine(a/t). Two required per 2-rotor engine.
|
|
|
List Price: $57.02
Your Price: $38.97
You Save: $18.05 (32 %)
13B Rotor Bearing. Technically this is a different part than the 13B-REW in the 3rd Gen FD RX-7, but you can get away substituting this significantly less expensive part.
|
List Price: $37.08
Your Price: $20.01
You Save: $17.07 (46 %)
Sold individually, these are the thinner 0.7mm thick side seals used from 1986 (FC) through 1995 (FD). They come a bit long, so you need to file/sand them down to fit. . Order 12 for a 13B 2-rotor engine or 18 for a 20B 3-rotor engine.
|
List Price: $17.19
Your Price: $8.47
You Save: $8.72 (51 %)
These are the springs for the thinner 0.7mm thick side seals used from 1986 (FC) through 1995 (FD). Sold individually. Order 12 for a 13B 2-rotor engine or 18 for a 20B 3-rotor engine.
|
|
List Price: $14.16
Your Price: $11.72
You Save: $2.44 (17 %)
Rear Main Seal for all RX-7s. Replace any time you remove flywheel.
|
List Price: $17.03
Your Price: $10.23
You Save: $6.80 (40 %)
This is the corner seal for all 1986 through 1995 rotary engines with 2mm apex seals. Includes rubber plug for the center, which helps cold-start compression. Sold individually. Order 12 for a 2-rotor 13B engine or 18 for a 3-rotor 20B engine.
|
List Price: $7.88
Your Price: $4.25
You Save: $3.63 (46 %)
|
List Price: $138.98
Your Price: $77.08
You Save: $61.90 (45 %)
|
List Price: $180.60
Your Price: $130.23
You Save: $50.37 (28 %)
|
List Price: $142.61
Your Price: $107.49
You Save: $35.12 (25 %)
|
List Price: $16.95
Your Price: $14.08
You Save: $2.87 (17 %)
Oil Galley Plug kit includes 2 large and 1 small replacement oil galley plugs.
|
Stock 1978-91 rear oil pressure regulator modified for higher pressure. We provide a regulator and modify it to your requirements from 70psi to 95psi.
|
|
|
List Price: $131.90
Your Price: $128.95
You Save: $2.95 (2 %)
***HOLIDAY SPECIAL*** Oil Regulator test tool for safely and accurately modifying and testing of the rear oil pressure regulator for all years.
|
List Price: $240.02
Your Price: $198.75
You Save: $41.27 (17 %)
Stationary Gear, Rear - RX8. Hardened/windowed. Great upgrade as it drops in 1974 and up 13B for engines without grooved gears. A new bearing is installed. For non-RX8 applications a slight mod necessary.
|
List Price: $184.81
Your Price: $152.04
You Save: $32.77 (18 %)
Stationary Gear, Front - RX8. Hardened/windowed. Great upgrade as it drops in 1974 and up 13B for engines without grooved gears. A new bearing is installed.
|