List Price: $49.95
Your Price: $30.53
You Save: $19.42 (39 %)
Tension Bolt Washer Removal Tool
|
List Price: $198.40
Your Price: $153.99
You Save: $44.41 (22 %)
|
List Price: $279.98
Your Price: $236.23
You Save: $43.75 (16 %)
This is the factory exhaust gasket for the 2nd Generation "FC" RX-7 TurboII (Series 4 and 5). It is an expensive metal-clad, single-piece gasket. If you want something more affordable, check out our line of graphite exhaust gaskets.
|
List Price: $20.48
Your Price: $19.44
You Save: $1.04 (5 %)
This is the factory exhaust gasket for the 89-91 2nd Gen "FC" Non-turbo RX-7 (Series 5) and 84-85 1st Gen GSL-SE.
|
List Price: $22.61
Your Price: $21.59
You Save: $1.02 (5 %)
This is the factory exhaust gasket for the 86-88 2nd Gen "FC" Non-turbo RX-7 (Series 4).
|
|
|
|
Mazda factory 89-91 (S5) "FC" RX-7 Manifold to Turbo Exhaust Gasket.
|
List Price: $88.18
Your Price: $75.50
You Save: $12.68 (14 %)
Stock Mazda 86-88 (Series 4) Turbo "FC" Manifold to Turbo Exhaust Gasket. Item pictured is Graphite alternative material. This is the metal OEM gasket.
|
This is our graphite version of the stock Turbo to Downpipe Gasket for 93-95 3rd gen "FD" RX-7.
|
List Price: $99.03
Your Price: $92.36
You Save: $6.67 (7 %)
This is the OEM metal Turbo to Downpipe Gasket for 86-91 "FC" RX-7 Turbo engines. Check out our aftermarket high-temp graphite gaskets as an alternative.
|
This is our high-temp graphite version of the OEM metal Turbo to Downpipe Gasket for 86-91 "FC" RX-7 Turbo engines.
|
List Price: $27.72
Your Price: $21.23
You Save: $6.49 (23 %)
This is the standard exhaust gasket used downstream of the downpipe. Larger diameter than the 2nd gen unit (pictured).
|
List Price: $25.99
Your Price: $19.49
You Save: $6.50 (25 %)
This is the standard exhaust gasket used downstream of the downpipe (turbo) or manifold (non-turbo). Smaller diameter than the 3rd gen unit.
|
Fits 1974-85 12A/13B, Reusable. Kit includes inner/outer coolant seals, dowel pin(4), oil pedestal(4), ft. cover(1), rear stationary gear o rings and tension bolt washers (20).
|
|
|
Upgraded Viton O-ring for Xcessive FD Aluminum Oil Pan. Does not get hard like the OEM o-ring previously provided in the kit.
|
Overhaul your mechanical Oil Metering Pump (pre-89) quickly and easily with the overhaul kit and instructional DVD.
|
Stock Lower Intake Manifold for 93-95 3rd generation FD RX-7
|
List Price: $99.85
Your Price: $79.95
You Save: $19.90 (20 %)
Our Oil Pedestal Adapter allows easy access to the oiling system for external oil lines, oil pressure or temperature. The Adapter has 2, 1/4" NPT threaded holes and 1, 1/8"NPT threaded hole. Installation kit included.
|
Intake Isolator Spacer for 6 Port S4/5
|
List Price: $15.95
Your Price: 8.95
Shim to allow use of the metal RX8 front cover gasket. Package of 1 pcs.
| | |