Search
Browse by Manufacturer
Browse Categories

App: 13B-T & 6PI NA (86-91 2nd gen FC)

Displaying products 1 - 24 of 24 results
HD Water Seal Kit-FC.S4/5, RE 1986up
Your Price: $124.95
HD Water Seal Kit-FC.S4/5, RE 1986up
NEW LOWER PRICE: HD Water seal kit-FC. S45 RE, includes tension bolt washers
Mazda 2mm, 2 piece 13B apex seal
Mazda 2mm, 2 piece 13B & 20B steel apex seal
List Price: $109.28
Your Price: $71.31
You Save: $37.97 (35 %)
Mazda 2mm, 2 piece 13B & 20B steel apex seal
Mazda 2mm 13B & 20B apex seal spring (long)
Mazda 2mm 13B & 20B Apex Seal Spring (Long)
List Price: $14.91
Your Price: $7.39
You Save: $7.52 (50 %)
Mazda 2mm 13B & 20B Apex Seal Spring  (Long)
These Mazda apex seal springs fit 2mm 13B & 20B apex seals from 1986 through 1993 (S4, S5, FD, RE, 20B). One long and one short spring are required per apex seal; 6 of each for a 2-rotor 13B and 9 of each for a 20B.
Mazda 2mm 13B & 20B apex seal spring (short)
Mazda 2mm 13B & 20B Apex Seal Spring (Short)
List Price: $13.87
Your Price: $6.89
You Save: $6.98 (50 %)
Mazda 2mm 13B & 20B Apex Seal Spring  (Short)
These Mazda apex seal springs fit 2mm 13B & 20B apex seals from 1986 through 1993 (S4, S5, FD, RE, 20B). One long and one short spring are required per apex seal; 6 of each for a 2-rotor 13B and 9 of each for a 20B.
13B-Turbo S5 Rotor Housing (front)
List Price: $868.77
Your Price: $749.00
You Save: $119.77 (14 %)
13B-Turbo S5 Rotor Housing (front)
Brand new OEM front rotor housing for 1989-1991 13B-Turbo (FC, 2nd gen, S5). Machined for running alternative spark plugs at no added cost. Recommend replacment in pairs. Rear housing is a different number, so order separately. Will NOT fit Flat Rate Box.
Freeze Plug Kit
Freeze Plug Kit
Your Price: $16.95
Freeze Plug Kit
Replacment set of metric expansion plug (aka Freeze Plugs) for all RX-7 Rotary Engines.
Rotor Housing Oil Metering Plugs
Rotor Housing Oil Metering Plugs
Your Price: $4.95
Rotor Housing Oil Metering Plugs
Use these plugs to block the oil metering injection bungs in the rotor housings when running premix or other alternative means to lubricate the engine internals. Kit includes 2 plugs.
13B-REW rebuild kit
13B-FC (2nd gen RX-7) heavy duty internal seal & spring rebuild kit
List Price: $1,431.50
Your Price: $1,231.63
You Save: $199.87 (14 %)
13B-FC (2nd gen RX-7) heavy duty internal seal & spring rebuild kit
Complete internal heavy duty seal and spring rebild kit for Mazda 13B Turbo and Non-turbo FC (2nd gen) RX-7 engine. Includes our special heavy duty water seal kit.
13B-Turbo S5 Rotor Housing (rear)
List Price: $868.77
Your Price: $749.00
You Save: $119.77 (14 %)
13B-Turbo S5 Rotor Housing (rear)
Brand new OEM rear rotor housing for 1989-1991 13B-Turbo (FC, 2nd gen, S5). Machined for alternative spark plugs at no added cost. Recommend replacment in pairs. Rear housing is different part number, so order separately. Will not fit Flat Rate Box!
13B-Turbo S4 Rotor Housing (front)
List Price: $868.77
Your Price: $719.00
You Save: $149.77 (17 %)
13B-Turbo S4 Rotor Housing (front)
Brand new OEM front rotor housing for 1987-1989 13B-Turbo (FC, 2nd gen, S4). Machined for running alternative spark plugs at no added cost. Recommend replacment in pairs. Rear housing is differentt number, so order separately. Will NOT fit Flat Rate Box!
13B-Turbo S4 Rotor Housing (rear)
List Price: $868.77
Your Price: $719.00
You Save: $149.77 (17 %)
13B-Turbo S4 Rotor Housing (rear)
Brand new OEM rear rotor housing for 1987-1989 13B-Turbo (FC, 2nd gen, S4). Machined for running alternative spark plugs at no added cost. Recommend replacment in pairs. Rear housing is different number, so order separately. Will NOT fit Flat Rate Box!
Main Bearing (pre-93)
Main Bearing (pre-93/ 2004-08 RX8-a/t only)
List Price: $34.50
Your Price: $27.84
You Save: $6.66 (19 %)
Main Bearing (pre-93/ 2004-08 RX8-a/t only)
Main Bearing for all rotary engines prior to 1993 and the '04-'08 RX8, low hp engine(a/t). Two required per 2-rotor engine.
Rotor Bearing - Pre-FD 13B
13B Rotor Bearing (pre-93)
List Price: $34.50
Your Price: $29.60
You Save: $4.90 (14 %)
13B Rotor Bearing (pre-93)
13B Rotor Bearing. Technically this is a different part than the 13B-REW in the 3rd Gen FD RX-7, but you can get away substituting this significantly less expensive part.
Side Seals (86-95)
0.7mm Side Seal (86-95)-sold individually
List Price: $33.11
Your Price: $16.99
You Save: $16.12 (49 %)
0.7mm Side Seal (86-95)-sold individually
Sold individually, these are the thinner 0.7mm thick side seals used from 1986 (FC) through 1995 (FD). They come a bit long, so you need to file/sand them down to fit. . Order 12 for a 13B 2-rotor engine or 18 for a 20B 3-rotor engine.
Side Seal Springs (86-95)
0.7mm Side Seal Springs (86-95)-sold individually
List Price: $14.91
Your Price: $7.40
You Save: $7.51 (50 %)
0.7mm Side Seal Springs (86-95)-sold individually
These are the springs for the thinner 0.7mm thick side seals used from 1986 (FC) through 1995 (FD). Sold individually. Order 12 for a 13B 2-rotor engine or 18 for a 20B 3-rotor engine.
Front Main Seal
Front Main Seal (pre-93)
List Price: $5.57
Your Price: $4.45
You Save: $1.12 (20 %)
Front Main Seal (pre-93)
Front Main Seal. Installs in front cover to prevent oil from leaking past the eccentric shaft. Always replace. One required per engine. This is technically the 2nd gen FC and earlier part, but they work fine for 3rd gen FDs (13B-REW) as well.
Rear Main Seal (all, excpet RENESIS)
Rear Main Seal (all, excpet RENESIS)
List Price: $13.49
Your Price: $10.79
You Save: $2.70 (20 %)
Rear Main Seal (all, excpet RENESIS)
Rear Main Seal for all RX-7s. Replace any time you remove flywheel.
Corner Seal w/Plug (86-95)
Corner Seal w/Plug (86-95)
List Price: $15.27
Your Price: $7.58
You Save: $7.69 (50 %)
Corner Seal w/Plug (86-95)
This is the corner seal for all 1986 through 1995 rotary engines with 2mm apex seals. Includes rubber plug for the center, which helps cold-start compression. Sold individually. Order 12 for a 2-rotor 13B engine or 18 for a 3-rotor 20B engine.
FD-Style Corner Seal Springs
FD-Style Corner Seal Spring (74-95)- Sold Individually
List Price: $6.85
Your Price: $3.84
You Save: $3.01 (44 %)
ratingratingratingratingrating
FD-Style Corner Seal Spring (74-95)- Sold Individually
Oil Control Ring Spring Set - 13B (74-95)
Oil Control Ring Spring Set - 12A/13B (74-95)
List Price: $73.36
Your Price: $58.68
You Save: $14.68 (20 %)
Oil Control Ring Spring Set - 12A/13B (74-95)
Oil Control Ring O-Ring Set - 12A/13B (74-95)
Oil Control Ring O-Ring Set - 12A/13B (74-2014)
List Price: $172.00
Your Price: $111.88
You Save: $60.12 (35 %)
Oil Control Ring O-Ring Set - 12A/13B (74-2014)
Oil Control Ring Tray
Oil Control Ring Tray (one inner and one outer)
List Price: $100.70
Your Price: $80.56
You Save: $20.14 (20 %)
Oil Control Ring Tray (one inner and one outer)
Oil Regulator Tool
List Price: $89.95
Your Price: $79.95
You Save: $10.00 (11 %)
Oil Regulator Tool
***HOLIDAY SPECIAL*** Oil Regulator test tool for safely and accurately modifying and testing of the rear oil pressure regulator for all years.
Shopping Cart
Your cart is empty.
Mailing Lists
Price Ranges