List Price: $86.93
Your Price: $69.54
You Save: $17.39 (20 %)
|
List Price: $8.34
Your Price: $6.67
You Save: $1.67 (20 %)
These Mazda apex seal springs fit 2mm 13B & 20B apex seals from 1986 through 1993 (S4, S5, FD, RE, 20B). One long and one short spring are required per apex seal; 6 of each for a 2-rotor 13B and 9 of each for a 20B.
|
List Price: $7.72
Your Price: $6.18
You Save: $1.54 (20 %)
These Mazda apex seal springs fit 2mm 13B & 20B apex seals from 1986 through 1993 (S4, S5, FD, RE, 20B). One long and one short spring are required per apex seal; 6 of each for a 2-rotor 13B and 9 of each for a 20B.
|
List Price: $1,032.07
Your Price: $826.17
You Save: $205.90 (20 %)
Brand new OEM rear rotor housing for 13B-REW (FD, 3rd gen). Machined for running alternative spark plugs at no added cost. Recommend replacment in pairs. Front rotor housing is different part number, so order separately.
|
List Price: $450.00
Your Price: $425.00
You Save: $25.00 (6 %)
High-capacity, O-ringed Aluminum oil pan for 3rd gen FD RX-7
|
NRS 3mm, 2 piece ceramic apex seal set with springs
|
List Price: $1,474.90
Your Price: $1,240.00
You Save: $234.90 (16 %)
Complete internal heavy duty seal and spring rebild kit for Mazda 13B-REW (FD, 3RD GEN) engine. Includes our special heavy duty water seal kit.
|
Replacment set of metric expansion plug (aka Freeze Plugs) for all RX-7 Rotary Engines.
|
Use these plugs to block the oil metering injection bungs in the rotor housings when running premix or other alternative means to lubricate the engine internals.
|
List Price: $1,032.71
Your Price: $826.17
You Save: $206.54 (20 %)
Brand new OEM front rotor housing for 13B-REW (FD, 3rd gen). Machined for running alternative spark plugs at no added cost. Recommend replacment in pairs. Front housing is different part number, so order separately. The REW is stronger than the FC housing
|
List Price: $61.20
Your Price: $52.02
You Save: $9.18 (15 %)
Main Bearing for 1993-1995 3rd gen FD RX-7 13B-REW engine. This is the multi-window version of the main bearing, only used on the 3rd gen RX-7 FDs. Two required per 2-rotor engine.
|
List Price: $48.14
Your Price: $32.90
You Save: $15.24 (32 %)
13B-REW Rotor Bearing. Technically this is a different part than the earlier 13B rotor bearings, but we feel it is safe to substitute the less expensive earlier part if your budget is tight. Price is per bearing. We recommend replacement in pairs.
|
List Price: $15.21
Your Price: $12.16
You Save: $3.05 (20 %)
These are the thinner 0.7mm thick side seals used from 1986 (FC) through 1995 (FD). They come a bit long, so you need to file/sand them down to fit. Sold individually. Order 12 for a 13B 2-rotor engine or 18 for a 20B 3-rotor engine.
|
List Price: $8.34
Your Price: $6.67
You Save: $1.67 (20 %)
These are the springs for the thinner 0.7mm thick side seals used from 1986 (FC) through 1995 (FD). Sold individually. Order 12 for a 13B 2-rotor engine or 18 for a 20B 3-rotor engine.
|
List Price: $4.45
Your Price: $3.78
You Save: $0.67 (15 %)
Front Main Seal. Installs in front cover to prevent oil from leaking past the eccentric shaft. Always replace. One required per engine. This is technically the 2nd gen FC and earlier part, but they work fine for 3rd gen FDs (13B-REW) as well.
|
List Price: $10.60
Your Price: $9.01
You Save: $1.59 (15 %)
|
List Price: $11.00
Your Price: $9.35
You Save: $1.65 (15 %)
Rear Main Seal for all RX-7s. Replace any time you remove flywheel.
|
List Price: $8.48
Your Price: $5.94
You Save: $2.54 (30 %)
This is the corner seal for all 1986 through 1995 rotary engines with 2mm apex seals. Includes rubber plug for the center, which helps cold-start compression. Sold individually. Order 12 for a 2-rotor 13B engine or 18 for a 3-rotor 20B engine.
|
List Price: $3.62
Your Price: $2.89
You Save: $0.73 (20 %)
|
List Price: $51.40
Your Price: $43.68
You Save: $7.72 (15 %)
|
List Price: $131.60
Your Price: $111.88
You Save: $19.72 (15 %)
|
Upgraded Viton O-ring for Xcessive FD Aluminum Oil Pan. Does not get hard like the OEM o-ring previously provided in the kit.
|
|
|