| | |
|
| |
| | |
|
|
App: 12A
Replacment set of metric expansion plug (aka Freeze Plugs) for all RX-7 Rotary Engines.
|
Fits 1974-85 12A/13B, Reusable. Kit includes inner/outer coolant seals, dowel pin(4), oil pedestal(4), ft. cover(1) and rear stationary gear o rings.
|
List Price: $30.12
Your Price: $23.84
You Save: $6.28 (21 %)
Main Bearing for all rotary engines prior to 1993. Two required per 2-rotor engine.
|
|
|
List Price: $10.85
Your Price: $9.22
You Save: $1.63 (15 %)
These are the thicker 1.0mm thick side seals used from 1974 through 1985, both 12A and 13B applications. They come a bit long, so you need to file/sand them down to fit. Sold individually. Order 12 for a 12A or 13B 2-rotor engine.
|
List Price: $0.85
Your Price: $0.72
You Save: $0.13 (15 %)
These are the springs for the thicker 1.0mm thick side seals used from 1974 through 1985, both 12A and 13B applications. Sold individually. Order 12 for a 12A or 13B 2-rotor engine.
|
List Price: $4.45
Your Price: $3.78
You Save: $0.67 (15 %)
Front Main Seal. Installs in front cover to prevent oil from leaking past the eccentric shaft. Always replace. One required per engine. This is technically the 2nd gen FC and earlier part, but they work fine for 3rd gen FDs (13B-REW) as well.
|
List Price: $11.00
Your Price: $9.35
You Save: $1.65 (15 %)
Rear Main Seal for all RX-7s. Replace any time you remove flywheel.
|
List Price: $3.62
Your Price: $2.89
You Save: $0.73 (20 %)
|
List Price: $51.40
Your Price: $43.68
You Save: $7.72 (15 %)
|
List Price: $131.60
Your Price: $111.88
You Save: $19.72 (15 %)
|
Overhaul your mechanical Oil Metering Pump (pre-89) quickly and easily with the overhaul kit and instructional DVD.
|
|
| | |
|
|
|